Difference between revisions of "UW-Stout/Growth Curve"
Line 20: | Line 20: | ||
#*Mode: Kinetic | #*Mode: Kinetic | ||
#*Read: 600 nm | #*Read: 600 nm | ||
− | #*Interval: 5 minutes | + | #*Interval: 5 minutes |
#*Total run time: 24 hours | #*Total run time: 24 hours | ||
#*Shake before read: 30 seconds | #*Shake before read: 30 seconds | ||
#Transfer the assay plate to the reader and run for 24 hours. | #Transfer the assay plate to the reader and run for 24 hours. |
Revision as of 07:26, 30 April 2019
Materials
- Corning COSTAR 96-well clear flat-bottom assay plate
- Falcon round-bottom polypropylene tubes
- YPD media, both broth and 2% agar plates
- Glycerol stocks of knockout strains
Equipment
- Incubator set to 30°C.
- New Brunswick TC-7 Tissue Culture Roller Drum
- Molecular Devices SpectraMax Plus 384 Microplate Reader
Protocol
- Three days before the experiment, streak knockout strains onto YPD plates.
- One day before the experiment, pick a colony from each strain into 5 ml YPD broth in a disposable test-tube. Incubate on the roller drum at 30°C overnight.
- The morning of the experiment, dilute each culture to an OD600 of 0.2 in YPD broth. Return to the drum roller for between 30 and 90 minutes.
- Transfer 100 µl to a well in the assay plate.
- Set up the plate reader as follows:
- Temperature: 30°C
- Mode: Kinetic
- Read: 600 nm
- Interval: 5 minutes
- Total run time: 24 hours
- Shake before read: 30 seconds
- Transfer the assay plate to the reader and run for 24 hours.